Boiler Repair & Installation in Park City, UT.
- Licensed, bonded & insured in Utah
- Homes & light commercial
- Emergency heating service
- Military discounts
Boiler Repair & Installation in Park City, UT
Total Air Control repairs, maintains, and installs gas-fired and hot-water boiler systems for homes and light commercial properties in Park City and across Northern Utah, including boilers that feed radiant floor heat.
Park City sits around 7,000 feet, and its winters are long. A boiler that loses pressure or stops firing during a cold snap can leave you without heat and put pipes at risk, and gas-fired equipment at this elevation needs its combustion set up for altitude. Our technicians check the boiler, controls, circulator pumps, expansion tank, and venting, then walk you through what we found and what it will take to fix.
Boiler Services We Offer
From a yearly tune-up to a full replacement, one team handles the whole system.
Boiler Repair
No heat, pressure that won't hold, leaks, banging pipes, short cycling, or lockouts. We find the cause, whether it's the boiler, a circulator, a control, or the venting, and fix it.
Annual Maintenance
A tune-up before heating season. We inspect the burner and heat exchanger, test safety controls, check pressure and the expansion tank, and confirm the venting is clear.
Replacement & Installation
Replacing an aging boiler or heating a new build. We size the system to your property's heat load, compare condensing and non-condensing options, and install to code.
Radiant & Hydronic Systems
Boilers that feed radiant floors or baseboard need balanced zones and the right water temperatures. We service the whole loop, not just the boiler. Radiant heating
Boiler stopped working?
If your boiler won't fire, is leaking, or keeps shutting down, call us and we'll get a technician out. If you smell gas, leave the building first, then call your gas utility or 911 from outside.
Signs Your Boiler Needs Service
- Banging, whistling, or gurgling from the boiler or pipes
- Pressure that keeps dropping or climbing past its normal range
- Water around the boiler, relief valve, or piping
- Rooms or zones that won't reach temperature
- Short cycling, lockouts, or trouble starting
- Higher gas bills with no change in weather or use
- A yellow or orange burner flame instead of mostly blue
Any one of these signs is worth a service call. Identifying a developing problem early may help prevent additional system damage or a more extensive repair.
Schedule an InspectionWhat Boiler Owners Should Know
Plan on yearly service
Many boiler manufacturers recommend professional maintenance on an annual schedule, and some warranties include specific maintenance requirements. Scheduling service before the heating season can help identify developing problems before colder weather arrives.
Safety comes first
Boilers involve gas, combustion, venting, and pressure. Keep carbon monoxide detectors on every level and near bedrooms, and leave repairs to a licensed technician.
Age affects efficiency
Many older boilers run at 80% AFUE or less, while condensing models commonly rate 90–95% or higher. If yours is 15–20 years old and needs frequent repairs, it's worth comparing costs.
Age affects efficiency
Older boilers may operate at lower efficiency than newer high-efficiency systems, especially as components wear or system performance declines. If your boiler is aging, needs frequent repairs, or struggles to heat the property consistently, it may be worth comparing the cost of continued repairs with replacement options.
Why Choose Total Air Control
We work on heating systems across Northern Utah every winter, from Park City to Ogden and Cache Valley, and we know how cold, altitude, and long heating seasons wear on equipment.
- Licensed, bonded & insured for HVAC work in Utah.
- Clear pricing explained before any work begins.
- Honest recommendations on whether to repair or replace.
- Fast help when your heat goes out.
Boiler Service FAQs
How often should I have my boiler serviced?
Many manufacturers recommend professional boiler maintenance about once a year. Routine service can help identify developing problems, support efficient operation, and reduce the risk of unexpected breakdowns during the heating season. Check the maintenance requirements for your specific boiler.
Should I repair or replace my boiler?
Whether you should repair or replace your boiler depends on its age, condition, and how often it needs repairs. A newer boiler with one repair issue may be worth fixing. An older boiler that keeps breaking down may be better to replace. Total Air Control can inspect your system and help you understand which option makes the most sense.
How long does a boiler usually last?
Many boiler systems can last 15 to 20 years or longer with proper care. Actual lifespan depends on the type of boiler, how often it is used, installation quality, maintenance history, and the condition of the overall heating system.
Why does my boiler keep losing pressure?
Boiler pressure can drop because of a water leak, expansion tank problem, relief valve issue, or another system fault. If you keep having to add pressure, schedule an inspection so a technician can find the cause instead of repeatedly resetting the system.
Is a boiler safe to use in my home?
Yes. Boilers are designed to operate safely when they are properly installed and maintained. Keep carbon monoxide detectors in your home, follow the manufacturer's maintenance recommendations, and have gas, venting, pressure, or combustion problems inspected by a qualified technician.
Why is my boiler making strange noises?
Banging, whistling, rumbling, or gurgling can be caused by air in the system, poor water flow, pressure problems, mineral buildup, or a failing component. If the noise is new or keeps happening, have the system inspected before the problem gets worse.
What should I do if my boiler suddenly stops working?
Start by checking the thermostat and making sure the boiler has power. If the system is leaking, showing unusual pressure, repeatedly locking out, or still will not produce heat, contact a boiler technician. If you smell gas, leave the building and call your gas utility or 911 from a safe location.
Can a boiler work with radiant floor heating?
Yes. Boilers are commonly used with hydronic radiant floor heating systems. The boiler heats water that circulates through tubing beneath the floor, helping provide even heat throughout the space. Proper water temperature, circulation, and zoning are important for system performance.
Do you service residential and commercial boilers?
Total Air Control provides boiler service for residential and light commercial properties in Park City and surrounding Northern Utah communities. Services include boiler repair, maintenance, installation, replacement, and hydronic heating system service.
What areas do you serve for boiler service?
We provide boiler repair, maintenance, and installation services in Park City, Ogden, Layton, Logan, and surrounding Northern Utah communities. Call 801-806-0912 to confirm service availability at your address.
Schedule Boiler Service in Park City & Northern Utah
Whether you need a repair, a seasonal tune-up, or a quote on a new boiler, we'll assess your system, explain your options, and give you clear pricing before any work starts.
Areas we serve
- Park City area
- Park City and surrounding communities
- Weber County
- Ogden, Roy, North Ogden, South Ogden, West Haven, Riverdale
- Davis County
- Layton, Clearfield, Kaysville, Syracuse, Bountiful
- Morgan County & Cache Valley
- Morgan, Mountain Green, Logan, Smithfield, Brigham City
